6KW 220V 380V 24000Rpm 800Hz Air Cooling ATC Auto Tool Change Motor ISO30 Tool Holder for Computerized Numerical Control Milling Maching Center(380V)

Industrial Motors1PCS 6KW 220V/380V Automatic tool changing 1. The main solenoid valve links with the main switch of machine tool, and the ventilation shall be carried out once the machine tool is started. 2.The normally open air circuit of the dual-position five-way single electronically controlled sole-noid valve is connected to the air seal, and the normally close air circuit is connected to the tool-changing. When the motorized completely stops, the power-on normally close air circuit of the tool-changing solenoid valve is connected to the cylinder for the tool-changing, the cylinder is actuated to complete the tool changing while completing the tool-changing and dust removal. At this time, the air seal is closed. After the tool handle enters the tapered hole of the , the tool-changing solenoid valve is powered off to cut off the air inlet, and then air pipe is connected to the atmosphere. At this time, the air circuit is ventilated, the cylinderresets the to lock the tool handle, and the tool-changing operation is completed. 3.The tool-changing pressure shall be stable. Otherwise, it is easy to cause that the tool-changing signal is instable. 4.The button switch is directly used to control the dual-position five-way single electronicallycontrolled solenoid valve for the manual tool-changing. 5.The proximity switch, tool-removal solenoid valve and the tool magazine work with the control system for the automatic tool-changing. 6.The manual or automatic tool-changing can be carried out only when the motorized stops completely. The manual or automatic tool-changing will be invalid when the motorizedrotates.

• Industrial Motors
• 6KW 220V 380V 24000Rpm 800Hz Air Cooling ATC Auto Tool Change motor ISO30 Tool Holder For Computerized Numerical Control Milling Maching Center